Re: Replacing rotors on '93 90CS

[Elliott Potter <epotter@abraxis.com>]

Oh, the wheel that didn't have it was the front wheel so I'm probably
fine.

Chris Newbold wrote:
> 
> At 08:00 PM 1/7/98 , Elliott Potter wrote:
> One semi-related question: on the front and back axles there should be a
> >grease cap which is visible if you take off the little cap on the wheel,
> >and this is missing on at least one of the wheels.  Should I replace
> >this?  If so, should I pack it with something?
> 
> I think you're referring to the wheel bearing cap. They're only on the
> rear wheels (and then, only on non-Qs, no?). It's the only thing
> keeping dirt/water/etc. out of the wheel bearing, so you may want to
> replace...
> 
> -Chris
> 1993 90CS 63k