A8 wheels don't fit UFO's :-(

[Wolff <wolff_b@ix.netcom.com>]

I got a set of the A8 wheels (AUDI/SPEEDLINE 7JX16H2ET37) from John
Karasaki and they look fantastic. They each have a set of _small_
scratches where the wheel weights were removed and some road dirt on the
inside, but otherwise look brand new. Problem is that they contact the
UFO's near the spoke area of the wheel. The center bore does engage the
hub so they are centered, but the wheel is about 2.5mm shy of contacting
the hub at the bolt on points. Can I add a spacer there? If so how
thick? KVR likes to see 3mm clearance wheel to calipers. Do UFO rotors
flex this much? Will a 10 to 12 mm wider track on front cause any
problems?
Thanks,
Wolff