Fw: Specs for 2.2l 10V Cam Upgrade

[David Boyd <john@dboyd.demon.co.uk>]

Your suggested email address won't work from here, so this is sent to the
List with apologies to the rest of them:

In case no-one else has responded:
Piper Cams, 2 St Johns Court, Ashford Business Park, Ashford, Kent TN24 0SJ
Telephone +44 (0)-leave the 0 out from outside UK) 1253 500 200  Fax +44
1253 500 300.
Regards
David
****************************************************
john@dboyd.demon.co.uk
Cumbria, UK.

-----Original Message-----
From: ROB_DUVALLE@CO.WASHINGTON.OR.US <ROB_DUVALLE@CO.WASHINGTON.OR.US>
To: quattro%coimbra.ans.net@mhs.co.washington.or.us
<quattro%coimbra.ans.net@mhs.co.washington.or.us>
Date: 04 February 1998 01:02
Subject: Specs for 2.2l 10V Cam Upgrade


>Help is appreciated!
>
>Going to rebuild my 2.2 Sycnro wagon, want to give it a little extra
>:-).  Going to have the cam grinded to better specs, but need any
>information/ referrals to those who have successfully done so.  Spoke
>with TAP and they indicated that an England shop "Piper cams" does their
>re-grinds.  Please email me at the following address if you have any
>tips, suggestions and full specifications for increasing performace on a
>2.2 10v cam.  Also, if you know how to contact "piper cams" I would
>appreciate a note.  Thanks for any help you can give me!!!!! This list
>has saved me more than once!  Please don't send back to the address this
>message came from - it is temporary, use the one below.
>
>rob_duvalle@yahoo.co