Re: Seat interchangeability

["Douglas Hurst Quebbeman" <dougq@iglou.com>]

..snip..

> Avi is right, they are not even close in dimensions.
> 
> Below is some BTDT, fresh from the news press.

..snip..

> Bottom line: I am stuck.

Have you considered removing the seat proper from the seat base?
Use the rail/base assembly from one car with the seats sans 
rails/base from another? Even if you had to drill a few holes, it
seems like this should work...

hth,
doug q
 
--
-Douglas Hurst Quebbeman (dougq@iglou.com)            [Call me "Doug"]
    QuattroClub USA# 4536              Audi International # 100024
       74 100LS Auto, 77 100LS Auto, 84 Coupe GT, 86 5Kcstq   
"The large print giveth, and the small print taketh away."  -Tom Waits