Chip / zener diode for boost adjustment

[Tom Thomas <tthomas@compland.com>]

Spent several hours manually looking through the archives for this, to
no avail.  I'm looking for instructions and which parts to use to allow
higher boost without defeating the fuel pump overboost shut off.  I just
recently purchased a 1.8 spring, and am reinforcing the IC, and
replacing all the turbo hoses (air, oil, and coolant).  

I know that this can be done with a zener diode, and a resistor (it
think that was the parts list), or by reprogramming the ECU.  Could
somebody please contact me off the list if they have the directions for
the cheap fix; or if anybody has would have the code and be willing to
burn me an EPROM.  I am comfortable with putting a chip socket in my
MAC-11, or any other electronics operations.  Sorry for the waste of
bandwidth.

Tom 
87' 5KCSTq 

Tom Thomas
ComputerLand of La Crosse, WI (usa)

tthomas@compland.com