[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: 4KQ minimum rotor thickness

To: j g shepard <chawk@juno.com>
Subject: Re: 4KQ minimum rotor thickness
From: James Marriott <marriott@micron.net>
Date: Mon, 02 Mar 1998 22:12:27 -0800
CC: quattro@coimbra.ans.net
References: <19980301.202106.6846.0.CHAWK@juno.com>
Reply-To: marriott@micron.net
Sender: owner-quattro@coimbra.ans.net

j g shepard wrote:
> 
> Does anybody know what the minimum rotor thickness is on an 85 4KQ?

Bentley says:
256 mm (10.08 in) vented front rotor:  new 20 mm (0.787 in), limit 18 mm
(0.709 in), min after machining (and before re-install) 18.5 mm (0.728
in)
245 mm (9.646 in) solid rear rotor:  new 10 mm (0.394 in), limit 8 mm
(0.315 in), min after machining (and before re-install) 8.5 mm (0.335
in)

hth,
James
'87 4kq
'86 4ks

References:
- 4KQ minimum rotor thickness
  - From: chawk@juno.com (j g shepard)

Prev by Author: Re: Dunlap SP sport D87m
Next by Author: Re: How to remove crankshaft pulley without special tool?
Prev by thread: 4KQ minimum rotor thickness
Next by thread: RE: torsen driveshafts
Index(es):
- Author
- Thread