[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Timing belt cover

To: roger@mostro.sps.mot.com (Roger Albert)
Subject: Re: Timing belt cover
From: ti@amb.org (Ti Kan)
Date: Fri, 6 Mar 1998 22:02:23 -0800 (PST)
Cc: quattro@coimbra.ans.net
In-Reply-To: <9803070320.AA18209@mostro.sps.mot.com> from "Roger Albert" at Mar 6, 98 09:20:54 pm
Sender: owner-quattro@coimbra.ans.net

Roger Albert writes:
> So, I'm very op;en to pointers.  In the meantime, does that metal hole
> plug described above have to come completely out, or is just getting it
> unthreaded supposed to be enough?

It comes completely out.  If you think the top cover is tricky, there
is also a bottom cover that is even more PITA.

-Ti
96 A4 2.8 quattro
84 5000S 2.1 turbo
80 4000 2.0
-- 
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Research Laboratories, Sunnyvale, CA. USA
  ///    ti@amb.org
 //////  http://sunsite.unc.edu/~cddb/tikan/
///

References:
- Timing belt cover
  - From: roger@mostro.sps.mot.com (Roger Albert)

Prev by Author: voltmeter reading (was: cheap 90 amp alternator fix)
Next by Author: Re: B Chassis Derivatives Comparo and What Will a 1.8T fit in
Prev by thread: Timing belt cover
Next by thread: The Torsen Mentality of Slip Angle
Index(es):
- Author
- Thread