Re: 200tq problems

[Robert Russell <ameco@map.com>]

Orin,
I am writing to you directly because  you and Scott M seem to really know whats up
with
Modified MC,s.  I have a 89 200q with a charile spring and the Schrap Knob set up.
Been running about 14 lbs or so. As of  late My stock in-dash  boost gague will read
0.0 at idle . down shifts it will drop to 0.0 also.   The car seem to run as well as
it ever did but I dont have the thrust of 14 lbs.  some times I can be at 2800 in 3rd
gear with light throttle and the gague reads 0.2 or less. Now the fun stuff,  Some
times when this occurs if I shut the car off and re start I will get a gague reading
of about 0.3 at idle. I feel I must have a leak. Any help would be appriciated.    I
have Unsubbed from the list   Too busy to review all the mail  So PlEASE Mail me
direct

Thanks, Bob Russell