[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Removing Audi Design Tape Deck

To: ecschott@earthlink.net
Subject: Re: Removing Audi Design Tape Deck
From: ti@amb.org (Ti Kan)
Date: Sun, 15 Mar 1998 18:06:52 -0800 (PST)
Cc: quattro@coimbra.ans.net (Audi Mailing List)
In-Reply-To: <350C7B3A.1EBF@earthlink.net> from "Charles Schott" at Mar 15, 98 05:07:53 pm
Sender: owner-quattro@coimbra.ans.net

Charles Schott writes:
> Can anyone give some tips on removing the original Audi Design tape deck
> from my '84 4kq?  It is the type with a small hole in each of the four
> corners of the deck face.  

Make yourself two U-shaped hooks with a coat hanger, so that you can
insert these into the holes.  Once inserted, just pull the deck out.

-Ti
96 A4 2.8 quattro
84 5000S 2.1 turbo
80 4000 2.0
-- 
    ///  Ti Kan                Vorsprung durch Technik
   ///   AMB Research Laboratories, Sunnyvale, CA. USA
  ///    ti@amb.org
 //////  http://sunsite.unc.edu/~cddb/tikan/
///

References:
- Removing Audi Design Tape Deck
  - From: Charles Schott <ecschott@earthlink.net>

Prev by Author: Re: looking for info
Next by Author: Re: Return from the land of VW/Audi
Prev by thread: Removing Audi Design Tape Deck
Next by thread: Re: Removing Audi Design Tape Deck
Index(es):
- Author
- Thread