Re: 4kq rear sway bar from Blaufegnugen?

["Martin Pajak" <quattro@rogerswave.ca>]

> How did you attach the bar to the rear subframe?  Did you cut the old
> brackets and weld them on the new subframe, or did you use some generic
> mounts/bushings?

I cut the brackets from the donor subframe (same one that the sway 
bar came from).  Used stock bushings (no money @ that time).
Welded the brackets onto the 4kq subframe.  Attaching the bar to the 
control arms was another story.  There I had to fabricate brackets 
and modify the control arm to allow for them to fit.  
It's hard to explain that one.  You have to use your own judgement 
and imagination.
HTH

Martin Pajak
quattro@rogerswave.ca
http://www.geocities.com/MotorCity/5939

1982 Coupe TURBO (473,150 km)
1984 4000s quattro (soon to be a rally car)
1986 4000s quattro (317,000 km) with four Nokia 10's
1982 Coupe (154,000) parts car

CEO of exam lastminute allniter rollthedice inc.