Re: '83 Ur-Q - No Spark

[Sachelle Babbar <sbabbar@iris.nyit.edu>]

I had the same problem last year. The reference sensor wasn't reading
anything because a guy decided to cross my wires. No spark. Wires put back
together, fine. Try testing your reference sensor as you have noted, it
could be your problem.

**************************************************************************************************************************************************							       
*Steve                                       Sachelle Babbar
*'84  5ksT 1.6-2.0 bar                    <SBABBAR@IRIS.NYIT.EDU>
*Cockpit adjustable wastegate, AudiSport badge
*
*Disclaimer:"Any information contained herein is based purely on my own
*personal experience and may not necessarily reflect yours. Use caution as
*your results may vary from mine."
********************************************************************************

On Thu, 19 Mar 1998, John C. wrote:

> In the absence of any responses to my previous post I have had to take the car to the local Audi garage.
> 
> They confirm that the problem is "No Spark".
> 
> This is the good news.  The bad news is that everything they have tested so far appears fine other than one of the Reference sensors.  I have also suggested that they check the current input "15" at the back of the fuse box which has given problems before.
> 
> Any other bright ideas or experience to share?
> 
> John Corbs.
>