Re: Are 4 x 100mm hubs interchangeable with 4x 108?

["Martin Pajak" <quattro@rogerswave.ca>]

> I want to install some 15" 4 x 108mm wheels on my Rabbit Pickup.  It it is
> simple as swapping wheel hubs and rear drums?  Also, is there such a thing
> a 4 x 108mm drums or 5 x 108? drums?

There is no Audi 5 x 108.  It's 5 x 112. 
The problem is that the Rabbit driveshafts will not fit the Audi 
hubs BTDT when the driveshaft on my Coupe failed and I tried to swap 
a complete outer CV out of a Scirocco.  The CV fit the shaft but it 
did bind when I installed it on the car. i.e you would have to 
replace the outer CV to match the bearing/hub combination.
Rear drums should fit as long as you replace everything to match them 
i.e. shoes, cylinders etc.  The spindle itself is the same.
It would be easier to get some 4 x 100 rims.
HTH
  

Martin Pajak
quattro@rogerswave.ca
http://www.geocities.com/MotorCity/5939

1982 Coupe TURBO (473,150 km)
1984 4000s quattro (soon to be a rally car)
1986 4000s quattro (326,000 km) 
1982 Coupe (154,000) parts car

CEO of exam lastminute allniter rollthedice inc.