Re: Cracks in firewall at clutch '85 4KQ

[Orin Eman <orin@wolfenet.com>]

> > I have seen this before.....
> >
> > "Biggus-footis-pushen-too-hardis"
> >
> > You clutch master cylinder input rod needs adjustment so it
> > doesnt bottom out the cylinder at each press of the clutch!
> >
> > You'll have to get the firewall repaired!

> If it doesn't bottom out, you can't bleed it.

There is a danger of breaking the linkage and/or pedal itself
(aluminium on later 200s) if it does bottom out before the
pedal hits its stop (the floor in the case of the 200s I believe).

I had the linkage snap on an '82 UrQ... fortunately right outside
my front door.

I guess that's why it is supposed to be pressure bled.

Orin.