ATE calipers & Carbon Metallic pads

["Graydon D. Stuckey" <graydon@apollo.kettering.edu>]

On Fri, 1 May 1998, glen wrote:

> Audi 200 series-Ate Front 89-91               HB135.700
> Audi 200 Turbo Quattro-Ate Front 90-91   HB135.700
> Audi 4000CS Quattro 86-87                      HB190.600
> Audi 4000CS Quattro 84-85                      HB190.600

> So, what Linus is saying is that the pads for the Ate calipers fitted to
> the 200s are different from the pads required for the Girling G60s and if
> the HB135.700 does not fit the G60, then perhaps there is no Hawk fitment

That is correct.  The ATE single piston pad (also known as the 394 or 
3944 pad according to the FMSI book) does not fit on the G60.   Further, 
I have never seen this ATE caliper on an Audi.   Anyone have these?

> some 5kcstq if the G60 was not fitted.  BTW, that pad, HB135 is also used
> on a lot of BMWs, including the E36 M3 and many '90s era 5 & 7-series cars.

That is true also.

I have some Performance Friction Carbon Metallic pads for the ATE single 
piston caliper if anyone is interested.  Email me directly for details.  
I'll let 'em go cheaply.

Later,
Graydon D. Stuckey

"Drive fast, take chances"  -  Brian Vinson
"...and blow the bystanders off the road"  -  John Corbs.
:-)