Tail lights 4kq

[John Lajza <JLAJZAIII@compuserve.com>]

Hi Derick,
To remove the rear corner lights; simply remove the four nuts (one in each
corner), unplug wiring harness,
grab the light and pull gently.  repeat for other side.  
For the center light assembly; Remove the four nuts.  These are two to a
side in the center of the light (top to bottom)
 about 2 and 6 inches from the edges.  I think that's all there are, double
check behind the license plate.  I recently 
removed one of these from a car in a junk yard.  I only had to remove the
four from the inside.  Don't know if maybe
somone else removed some other's.  Anyhow just go slow and easy.  Oh yeah
disconnect the lights.
Good luck,
John 
PS;
 I don't know what the sticky black sealent is but, I recomend finding and
 using the same stuff when you re-assemble.  I've tried RTV and other
sealents with no luck.  If you find a 
source for it or know what is, let me know.