Re: Valentine 1 Install

[usawctchair@juno.com (Gary M Whipple)]

thanks for the info!  I can't open drawings with Juno mail, so I'll have
to  forward it to work and try there.  If the drawing doesn't address how
to take the A pillar cover off, could you please help me there? 

Gary Whipple
usawctchair@juno.com

On Thu, 02 Jul 1998 12:27:35 -0400 four.rings@MCIONE.com writes:
>usawctchair@juno.com (Gary M Whipple) wrote:
>
>
>Has anyone permanently installed a Valentine 1 (or other
>detector) in an A4 ? I'd be interested in your power source and
>power line routing. I'd like to install mine so that I don't
>have to rely on the lighter socket and an external cable.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>
>I hardwired the Valentine into both the 200 and the A4.
>The 200 was easy - it has a switcheable +12v in the suroof
>circuit.
>
>The A4 has +5v in the sunroof (evidently it is controlled by the
>TTL logic) so I had to run the switcheable +12v line from under
>the dashboard, through the LH A-pillar, above the windshield
>under the headliner to the sunroof/illumination access panel.
>
>Attached please find a drawing in MSWord 97 format.
> 
>************************************************************
>Igor Kessel
>'89 200TQ -- 18psi (TAP)
>'98 A4TQ -- nothing to declare
>Philadelphia, PA
>USA
>http://www.geocities.com/MotorCity/Garage/8949/homepage.html
>************************************************************
>