re: A/C Fault code #9

[Phil Rose <pjrose@servtech.com>]

I recently went through the same unnecessary angst with an "09" in my '89
100. On the '89s, the 09 code in channel 1 is perfectly OK. In later models
('91) it indicates failure of a coolant temp. sensor, which The '89s don't
have.

Phil Rose


>Date: Fri, 10 Jul 1998 17:55:46 EDT
>From: SSpangenbe@aol.com
>Subject: A/C Fault code #9
>
>I can't find a reference to a fault code reading I'm getting on channel 1.  It
>displays a "9."  I drive an 89 200T.
>
>Also, the volts shown on channel 11 fluctuate from 12.1 to 13.6 as I'm
>driving.  No changes to the load put on the alternator.  Is this normal or
>should I get a new voltage regulator?
>
>tia,
>
>Scott
>
>89 200T, 188k mi
>85 5ks, gone
>79 5ks, gone

Phil

Phil Rose		Rochester, NY
'89 100
'91 200q		pjrose@servtech.com