Re: Xenon 9004 blue tint bulbs

["Matt Rooke" <mrooke@fcpa.fujitsu.com>]

Sounds like a good excuse to put in relays.  To get started, check the 20V web page at
http://www.geocities.com/MotorCity/Speedway/3229/  Look under "upgrades"

I've also seen wiring diagrams at other web sites, but it is really pretty simple.  Main thing is to anticipate all the
parts needed so as to avoid more than 5-10 trips to the HW store.  I ordered the relays from DigiKey as they have a
slick mating connector, but there are lots of other sources.

Howard, you are in the bay area right?  If you want, you can check out my setup.

Matt Rooke
San Jose CA
'91CQ

>I impulsively bought some new 9004 headlight bulbs from "blaufergnugen." They
>are the xenon filled blue tint type.  80 watt lows/ 100 watt high. They
>arrived and now I'm not sure if I should install them as I've been hearing
>from other listers that their wiring or harness has melted. So my question >is,
>has anyone had an experience with this specific bulb? Item #DBD9004CEC xenon
>80/100w xenon gas Halogen. If so, I would like to hear about it. Please >e-mail
>me directly at AQUATTRO4U@aol.com as your experience would definitely be
>appreciated. I want more light but am afraid of making a big $$$ mistake.
                                         Thanks a lot
                                         Howard Dinits