RE: Oil pressure icon blinking on '91 200Q

[James Desveaux <desveaux@ucla.edu>]

Thanks for the input from Tony Lum, Ned Ritchie, and Dave Flagg.  I ordered
the 'white colored' 1.8 bar pressure switch, but I seriously doubt that's
the source of the problem.  Looking through the Bentley, (as Ned moreless
pointed out), the sending unit doubles as the sending unit for the 5 bar oil
pressure gauge, and the .3 bar low side oil pressure switch.  THis
distinguishes the setup on the 3B from the MC and NF (which apparently have
independent .3bar and 1.8 bar switches, but no sending unit).  So I'll do
the appropriate resistance tests on the WK and G sides of the sending unit,
and go from there.  If anything worthy of revelation reveals itself, I'll
post it.  (I certainly don't want to offend the likes of Bryan Carter and
post trivia to further clutter mailboxes).