[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: 90 V8Q leaking Transmissi
-=> George Earle illuminates us with <=-
GE> Anyone have this problem? Did you:
GE> * replace transmission (new or old)
GE> * find gasket parts (the Carlson Audi dealer says Audi doesn't have
GE> them anymore)
GE> * find seal parts
Could you be a little more vague? There was a
bulletin on the tube going to the tranny leaking,
wasn't a difficult fix. If it's the pan gasket
it's a pretty straightforward fix (you have to
drop the front X pipe) and remove the shifter
cable cover to get at the pan bolts. It's an
interesting setup that doesn't allow you to
overtighten them, as they have a stop and what
actually holds the pan in place is the lip
of the pan. You also have to make sure and
NEVER use any kind of sealer on the tranny
pan gasket, according to Audi it has to
"breath" in to keep if from leaking.
Or, it may just be overfilled, if the car
doesn't have a dipstick (probable), order
one from the dealer ($14.01) and check
the level. If you could be a little more
specific as to exactly where it's leaking
might be able to help a little more.
BCNU,
... Abandon all hope, ye who press ÄÄÙ here
___ Blue Wave/386 v2.30