Carlsen general comment was Re: P/N for Cover hold down screws - V8 & 20vI5

[John Karasaki <johkar@teleport.com>]

Steve and all,

Has it been anyone else's experience that Carlsen and Audi dealerships in
general need the exact part number to find/supply may Audi parts?

Just a minor nit pick really, but since most don't have the microfiche this
seems like a quandary.

John Karasaki
"now with 50% more Audis"


At 10:48 AM 8/20/98 -0700, you wrote:
>As I told John earlier, I found that those silly plastic head screws that
>hold down the covers for the spark plugs and wires on the V8 were called out
>separately on the fiche ... and actually picked up a replacement set for my
>car from Carlsen.  Last night I checked the fiche for the '91 200Q and found
>that they use exactly the same part.  If other twin or 4 cam Audi apps have
>a cover over the "valley" between the cams for the spark plugs and
>coils/wires this same part may be used ... but I did not confirm this.  
>
>The part number is 077 103 713 A and the part may be referred to as a "spark
>plug cover hold down screw."
>
>HTH!
>Steve Buchholz
>San Jose, CA (USA)
>
>
Best Regards,

John Karasaki
Portland, OR