Re: Radio Removal

[JMCarolan@aol.com]

To get the radio out you need to find two small diameter (1/8") rods (I use
small philips head screw drivers).  You push these in the holes on one side of
the radio and pry slightly to the left on the left and to right for the right
side. As you apply pressure to the left or right also pull towards you
slightly. What you are doing is depressing two spear shaped tabs that keep the
radio from sliding out. 

Do this on one side until the radio is loose and then do it on the other. At
this point the radio should be loose and you should be able to pull it out
until you can undo the connections. Then throw it away and buy a real one!
Just my humble opinion :).

James
86' 4kcsq (new Sony CD deck with Infinity separate speakers and a 10 disk unit
in the trunk... musical nirvana)