Seat Removal

["Ron Roth" <talkpine@lightlink.com>]

Mark-
Just did this today on my 84 4ks (they are all the same, I've
been told), put in seats from a VW Quantuum as mine were dead 
and unconfortable.  It was kind of easy:
1. Pull lever and move seat forward, under front of seat
     is a hex bolt and nut assembly.  Nut is 10mm
2. Remove the bolt and nut.
3. On back of seat on floor at ends of tracks should be plastic caps
     held on with philliips screws, remove these, should slide back.
4. Lift lever and push/pull seat back, it will slide free of tracks.
5. Take them out of car
It was much easier than I thought it would be, let me know if you
have any problems or need help!

>Date: Tue, 1 Sep 1998 10:16:30 -0500 (CDT)
>From: "Mark L. Chang" <mchang@ece.nwu.edu>
>Subject: 4kq: Seat removal / Caliper painting

>Just took a peek at Mr. Bentley and wanted BTDTs:

>87 4kcsq -- how do you remove the front seats?  Any tips?  Thought I'd ask
>before I bust out the tools :).

HTH-      Ron

oooo      Ron Roth   Ithaca NY USA      84 4000S         
www.geocities.com/MotorCity/Garage/8793/index.html