Re: ISO: idle/full throttle switch assy for KG/KH

[Autobahn01@aol.com]

In a message dated 98-09-10 18:20:13 EDT, frankbauer@thevine.net writes:

<< i think the same switch assy is used for the US-market KH engine (manual
trans
 only?), which is used in 85 (and later?) 5kt's (non-quattro).
 the assembly includes two microswitches attached to a single 3-pin
 locking connector with a pair of short round black wires. >>

Frank, the KH does use the dual microswitch setup, Vs the MC with it's
potentiometer. The KH throttle body is also noted for it's round accordion
hose, does yours have this setup? If so, you may well be able to scavenge a
used throttle off an '84/'85 5000T and bolt it right up.

Cheers,
Chris Semple
w/KH intake on the bench