Found a source for 11/16" drag link for pump caps

[Wallace White <wallace@remdesign.com>]

I'm looking for that drag link socket for the caps on the hydraulic
pump, and I found a Proto 11/16" wide, 0.120" thick socket, 3/8" drive.
Grainger carries them as part 1AH92, $10.32. (Unfortunately they don't
stock them at the local stores, though, so they ship from Chicago or
somewhere.) 

I know several people have mentioned filing down a 3/4" drag link
socket, so I thought this might be a good alternative. (Proto's 3/4" is
very nearly the same thickness.) I'm not sure whether I'll wait to
receive this through Grainger or look elsewhere, but I thought it might
be useful for others as well.

- Wallace
  '87 5kcstq 150k