Rear Wiper Motor - '91 100 Avant (Wagon)

[David Boyd <john@dboyd.demon.co.uk>]

If some kind soul could check their Bentley (or vehicle) for the
securing arrangement for this wiper motor spindle, I would be very
grateful. It is some time since I removed the motor and I think I may
have lost a washer.

As far as I can see, a domed rubber moulding shrouds the hole in the
tailgate glass, and on the inside of the glass there is a large steel
washer between the motor case surrounding the spindle and the moulding.

But on the outside, where the spindle protrudes, should there be another
large steel washer or what, between the spindle securing nut and the
rubber moulding ?

My Haynes manual is no help, and as usual with these things, one assumes
one will remember but...............


-- 
David Boyd
mailto:david@dboyd.demon.co.uk
Cumbria, UK