Matching locks and keys

[Tom Nas <tnas@euronet.nl>]

Hi all,

Can anyone tell me if it's possible -on a 90q- to extract the lock tumblers
from the ignition, and match them to the doors? All this talk about locks
has made me realize that I'd like to have matching locks all round (and
then there's the trunk to contend with, none of my keys seems to fit this).
Is it hard to get the door locks out on the newer type of door handle (I
expect it to be the same as on 100/200-type cars), and is it hard to get at
the ignition barrel (in the dash instead of the steering column)?

BTW While we're on the subject of 90qs- mine seems to run rather hot. It's
at or below 100 C a lot of the time, especially when stationary. Any data
points from fellow 90q owners (2.3 NG engine)?

TIA!

Tom

 _______________________________________________________________________
 Tom Nas                                          Zeist, The Netherlands
 tnas@euronet.nl
 1987 Audi 90q 2.3E, Tizianrot metallic, 167,000km

       Never take life seriously.  Nobody gets out alive anyway.