Brakes, bias adjuster, suspension bushings 86 5KTQ

[gabel@acmepower.com (Glen Abel)]

     OK, I have been chasing a rotor warping problem for a while now, I 
     have re-built all the calipers, the floating pins are working well, I 
     took the bias adjuster and cleaned it made sure that worked properly. 
     
     It seems to me the car just doesn't have enough rear brake. the throw 
     on the bias adjuster is short. Very short. Like .050   
     Has anybody eliminated it?  Thats my next step.  The brakes work OK 
     but not like I think they should. I had a Scirocco 16v with the same 
     setup and those brakes worked awesome. (Granted Im driving a heavier 
     car) 
     
     
     Next question, Ive replaced the following; Struts, Front and rear, 
     Rear tie rod ends, Front tie rod ends, yet the car still "Clunks" when 
     going over bumps, Is there a Suspension bushing kit available? after 
     that theres nothing left. I checked the ball joints and they seem 
     really tight. the wheel doesnt move. I have replaced so much on this 
     car I wont stop until its perfect now.....Everything else works...
     
     Glen
     
     86 5000tq
     86 944 turbo
     95 ram 1500