Re: 4kq Gauge

[Arthur.L.Berrier@sealedair.com]

Ti Kan writes

>
>The clock on my 80 4000 still works (knock on plastic)... :)
>I have seen quite a few of these clocks fail, though.  The failure
>seems to be a burnt out resistor on the little circuit board in
>the clock.  When this happens, the clock stops, but you can still
>see the second hand wiggle just a tiny bit (trying real hard...).
>
>- -Ti

The clock on my '85 CGT failed with this mode in 1990 or so.   A couple 
years later my wife called me out to the garage after driving it.  
"See, I fixed it for you" she said pointing down at the dash.  Sure 
enough, the clock was working again.  Hasn't stopped since.

She hasn't been able to do anything with the broken odometer though.


Art Berrier