[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

RE: 91 200 tq ABS sensor

To: "Rob Winchell" <rbw@avs.com>, "Tom Nestor" <tnestor@cyberportal.net>, "200q20v list" <200q20v@pdikeman.ne.mediaone.net>, "quattro list" <quattro@coimbra.ans.net>
Subject: RE: 91 200 tq ABS sensor
From: "Frank J. Bauer" <frankbauer@thevine.net>
Date: Sun, 15 Nov 1998 15:31:37 -0800
Sender: owner-quattro@coimbra.ans.net

At 12:45 AM 1/3/98 -0500, Rob Winchell wrote:
>I have been unable to find any specs on what the gap should be, but I did
>find a diagram on the AllData CD showing the shaft splines and the sensor
>having a gap there. I may just experiment a bit to try and find the right
>distance. I'm thinking "push in to stop", then back out a little bit.

rob:
as phil posted thursday, you need a set of 4 abs wheel speed sensor caps.
as i posted thursday, the part number is 437 927 809.
you should be able to hear the cvj teeth scraping the plastic caps when the
sensor is seated correctly.

frank

Prev by Author: Re: Brakes done, wheel install?
Next by Author: RE: coolant expansion tank part no.
Prev by thread: RE: 91 200 tq ABS sensor
Next by thread: Re: 91 200 tq ABS sensor
Index(es):
- Author
- Thread