[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: 5kt no spark!!



Ok, I have no bentley until friday and would like to dump the codes
but no fuse in top of FP relay. so how do I do it???
TIA!!
Rich 
> 
> I think the MAC-07 might be a little different ... it may actually read the
> codes out by setting the tach to a certain RPM.  If you have a Bentley look
> in there ... there are usually alternative techniques for actuating the
> diagnostic info given there.  If you don't have the Bentley for the car let
> me know ... I've got Bentleys for both the Type 43 and 44 versions ...
> 
> HTH!
> Steve Buchholz
> San Jose, CA (USA)
> 
> > ----------
> > trying to fire but now, no spark... no spark from coil.....
> > Power to coil, power on both top coil wires (green and blue)
> > no power to the module next to the coil (green with white stripe/brown w/
> > white strip) put a know good MAC07a in. It is an '85 5000t w/ kh motor
> > Anyway to dump fault codes from this car as the FP relay has no fuse spot.
> > 
>