V8Q Hall Sender question.

[cobram@juno.com (. .)]

FBFISH@aol.com writes:

>I did have an issue with similar symptoms which 
>ended up to be the Hall sensor in one of the distributors. 

While kind of on the subject, when I changed the timing
belt on the V8Q, I forgot to plug the distributor back
in.  I drove around with the hall sender disconnected for
about a week, only thing I noticed was a very slight loss
of power and a bit of surging.  I'm still wondering why
the thing ran at all, no warning lights, nothing.  Is
disconnecting the Hall sender something you can do on
all Motronic units and still have the car run?  I'm 
guessing it defaults to some preset program in lieu
of the hall signal.

BCNU,

Cobram@Juno.Com
http://www.geocities.com/MotorCity/Flats/1469/

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]