[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: O2 sensor testing
Steve Bigelow wrote:
> Checked "input" voltage to ground, got about .330V (sensor disconnected,
> engine running)
> Checked "hot running" voltage to ground, got .560V to .830V (tapped into
> connector, engine running)
Question: Does the "hot running" voltage continue to fluctuate between the
above stated values? As long as the car is running, it should continue to
bounce up and down.
--
Todd Young WAM!NET Inc.
tyoung@wamnet.com 6100 West 110th Street
612-886-5051 Bloomington, MN 55438-2664
800-585-1133 ext.5051 http://www.wamnet.com/