hertz audis

[MHLIGGINS@aol.com]

<<A couple degrees either side of TDC has been found by many, I have measured
no more than 2, but that's plenty to create quite a difference in motor
output.  >>

	And the timing gear on the cam contributes to the confusion.  I have several
of the 10v gears in the shop.  Lining up the keyways and looking at the teeth
provides an interesting insight.  The teeth do not line up.  Some are the
same, some are 1/2 tooth off, which means some will "automatically" be off by
a certain amount.  Just wish I knew which cam sprocket was "correct".
	As it is now my current engine uses the "super" belts so I guess it doesn't
really matter if I know or not, huh?   ;-)

	Later.
	--ml