Re: TDC II

[MHLIGGINS@aol.com]

In a message dated 12/11/98 3:49:09 PM Pacific Standard Time, bbell04@ibm.net
writes:

<< 360/44 = roughly 8 degrees per tooth at the cam and since the cam only
turns
 at half the rate of the crank, that is over 16 crank degrees.
 
 Bruce >>
	You're right, of course.  I was in a hurry to get the message sent 'cause I
had to go take pictures at the high school.  Thanks for the correction.
	That's a lot of degrees, ain't it?  All the more reason to have both cam
gears....

	Later.
	--ml