RE: H&R Springs

["Ken Keith" <ken.keith@specialdevices.com>]

It would seem, sitting here at my keyboard, that you should be 
able to tell by compressing the springs which ones are stronger, 
which I would assume go on the front.

Ken

"Unterseher, Reed [SGT]" <runterseher@nd-arng.ngb.army.mil> wrote:
> 
>  The ones with the large diameter go on the front. When you start
>  pulling things apart you will have NO problem telling which goes where.
> 
>   -----Original Message-----
>   From:	Thomas Barbera [SMTP:tjbst39+@pitt.edu]
> 
>   I just purchased a set of H&R sport springs for my '86 4kq
>   along with Boge Turbo Gas Shocks.  I opened the box and realized that the
>   springs are all about the same height, maybe a slight difference.  Each pair
>   has a different part number, but there are no diagrams in the box.
>   My question is, which part number goes in the front and which in the
>   back?  I have an idea, but I don't want to put the wrong springs in the wrong
>   place.  Thanks in advance.