[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Wheels

They do exist. (Might not be common.) I Found some 15x7 R-8's with 108
bolt pattern 42mm offset for $120 the set. One needs straightening so
figure another $65. Still a good deal IMO.
Wolff
P.S. I finally figured out that you measure diagonally from bolt center
to bolt center to get the bolt pattern. When I got the wheels I knew
they looked like 108's, but when I measured them after the purchase I
came up short since I was measuring adjacent holes. I was bummed out.
Recently I tried test fitting them to the 4k fwd which at this point I
had thought they should fit (100mm) and the holes were too far apart.
Hooray, that means they fit the Q.

Robert_Manger@mastercard.com wrote:
> 
> Good Morning fellow Q-listers,
> 
> Do 15" wheels exist for my 4kcsq that can be found cheaply?  i.e. junkyard
> fodder
> 
> Thanks,
> 
> Rob