CV Joint Part # for 80Q Driveshaft?

["Scott Mo." <scottmo@teleport.com>]

Hello,

Looking for a part number or source for the Constant Velocity Joint used on
the Drive Shaft on the 1989 80 Quattro. This drive shaft runs up the center
of the car, front to rear, has one CV joint at the front and one at the
back, and has the center U-Joint and support bearing. The CV looks to be
the similar as the 5000/200TQ driveshaft CV but I have not confirmed this. 

The Lobro part number on the OEM CV joint is 7 153 12 01 84 020.

A local parts store cross referenced another vendors number to a front axle
CV joint from a 79 Audi 5000, but the  inner cage slot dimensions don't
match up with the OEM joint. The outer dimensions looked to be the same.

 The Audi fiche lists only the whole driveshaft as many know.

Thanks
Scott Mockry

http://www.teleport.com/~scottmo