4kq blues....

[rjandrew@post.cis.smu.edu (R Justin Andrews)]

Hi guys....
I am miserable. :<
Here's the scoop... my 4kq has these new parts w/in the last 6 months....
Eibach springs, Boge struts, Strut bearings, control arm bushings,
ball joints, tie rods (rear) tie rod ends.....
Now, I had my car aligned 3 times w/in the last 2 weeks and 
the toe is set at .05 degrees in the rear 1.3 camber and 1.0 negative (on both)
rear tiers... now... every time i hit a bump the @ss end of the car kicks 
out like it's trying to oversteer (sideways like a rwd) every time I had it 
is sucked! except the last time it was OK... it felt a lot better for about
1 day! 
I am about to take this car to the dealer in the morning for a $35 diagnostic..

Could Control arm bushings get this worn off of bent rims for 4 months???

They are NOT torn but I will check them further if I here a yes CHECK THESE...

BTW, the tires are also scalloped.....
ARGH!!! New 16's I am frustrated!!

Please help me!!!!! :<
Rich Andrews
rjandrew@Post.cis.smu.edu
'86 4kq making me go into depression...