oil buzzer warning solved! -thanks !:)

["Ed Shiers" <mamn97@pop.dial.pipex.com>]

am feeling extremely relieved as found it was the oil buzzer sender 
at fault - able to get my oil pressure vdu working thanks to your 
mail. The gauge is reading top of scale over 2000 rpm and 1.5 bar at 
idle so looks like its healthy. Just found the link for the archive 
today and so from now on will not need to pester you with _most_ of 
the recurring problems.		
Also am doubly pleased cause i've solved the clonk i reported last 
week - it turned out to be the ball joint to controll arm adjstment 
bolts being loose! which is what was suggested by someone (cheers).
The torque settings in the haynes manual seemed far to low and i 
ended up torquing to nearly doubl to stop the clonk.
My audis running as smooth as it ever has now after thinking it was 
dead only a few hours ago.
Many thanks again!
happy motoring
ed shiers

'85 80 sport

David Shiers 
West Midlands IRIS Initiative
work 01538 381022   
home 01538 399660
fax 01538 398638