Re: Automatic Up/Down Window Module

[Huw Powell <human@nh.ultranet.com>]

>     If you really need this full up & full down,  do away with using the
> existing switch in the conventional manner.  Keep it hooked up but not
> plugged into the door module.  Replace the switch in the door module with a
> two way toggle switch which would be spliced into the wiring harness.  By
> reversing the polarity, you achieve the switching to the motor and in turn,
> have a full up or full down, depending upon your need.

yeah, but... I don't want to have to use any extra switches.  This
already occurred to me and I pretty much scrapped the idea.

>     I'm assuming that the reason the motor stops is that an overload to the
> motor closes down the circuit when the "full travel" of the "slider" is
> reached.  

Nah, it's a timer.  Just sits there running at the end of travel 'til
time's up.  Too bad, really, a current sensing system would be so much
nicer.

-- 
Huw Powell

http://www.thebook.com/human-speakers

82 Audi Coupe; 85 Coupe GT
http://www.nh.ultranet.com/~human