Re: vacuum looking thingy

[MSV96@aol.com]

In a message dated 2/9/99 "Chris Dyer" <chrisdyer@hotmail.com> writes:

<< I need a new part, having trouble finding it.  It's the cheap, crappy
plastic hose and its cheap, crappy vacuum-cleaner-shaped end that cools the
fuel lines.  It's the one that goes over the valve cover towards the left,
about 2-3 in. or so in diameter.  Anyone?  Dealer wants about $4,300 or so for
it.  Too high? >>

I think the part # for the hose is 055129087D and was just under 3 bux from
Linda (Carlsen). (This from an invoice, not parts fiche so may not be
correct.)

The plastic shroud is called the injector cooling shroud (or something like
that). Someone with a parts fiche can give you the number but last I checked
they are around 90 bux. A good find used at a pick and pull yard when you can
find 'em.

HTH

Mike Veglia
87 5kcstq