Re: removing door panels...

[Scott Sierakowski <scott@collectorspub.com>]

They are usually on there pretty good..........if it is a newer model
you have to grab the handle and the base of the door panel and pull up
like crazy.  There are clips on the back of the panel with rubber liner
inserts (maybe to reduce squeaks) these usually fall out then you pull
the panel, just a warning.  It it is an older model there are snap like
pins that hold the door to the metal frame.  Use a screw driver to pop
up the pins, go around the sides and base of the panel after removing
the top screws and the ones under the handle.  Good luck

Scott Sierakowski
95 90Q Sport