[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Master Cylinder grommets

To: Matt Martinsen <mattmartinsen@hotmail.com>
Subject: Re: Master Cylinder grommets
From: only5kgt@uswest.net
Date: Mon, 22 Feb 1999 23:46:58 -0700
CC: quattro@coimbra.ans.net
Delivered-To: fixup-quattro@coimbra.ans.net@fixme
References: <19990223044922.28335.qmail@hotmail.com>
Reply-To: only5kgt@uswest.net
Sender: owner-quattro@coimbra.ans.net

With all this talk of master cyl. grommets (mine leak slightly, so this
has been very helpful), I must put forth the question one more time-
what's the preferred procedure for replacing these things without damaging
the plastic reservoir??
Regards,
Rob

Matt Martinsen wrote:

> I can confirm the 811 611 817 PN. University Audi had them in stock at
> 8.19 each.
> -Matt Martinsen
> Seattel, WA
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com

Follow-Ups:
- Re: Master Cylinder grommets
  - From: "Wm. Josiah Erikson" <werikson@hampshire.edu>

References:
- re: Master Cylinder grommets
  - From: "Matt Martinsen" <mattmartinsen@hotmail.com>

Prev by Date: Re: Leaking hydraulic servo, rebuilt source link
Next by Date: Re: urq vacuum hose lengths
Prev by thread: re: Master Cylinder grommets
Next by thread: Re: Master Cylinder grommets
Index(es):
- Date
- Thread