Re: Hydraulic pump - HELP!

[quk@isham-research.demon.co.uk (Phil Payne)]

In message <3.0.5.16.19990217223129.2a7f3cf2@pophost.micron.net> James Marriott writes:

> Don't have a fax here, but from the relevant section of the TSB:
> Remove two check valves for brake hydraulic portion of pump (arrow to CVs;
> they may be stuck. The last pump I did I could only remove 1. YMMV)
> Replace O-rings on check valves and reinstall in housing
> Tighten check valves to 15 Nm (11 ft lb)

Thanks to _everyone_ who responded - about 12 in all, odd little details
in each.  It felt kinda weird belting seven shades of sh1t out of a
poor little 4mm Allen socket, but it worked on both valves without
damage.  Amazin'.

The front portion of the pump is now stripped and cleaned.  I'm glad I
pulled the check valves - lot of gunge in there.

--
 Phil Payne
 Phone: 0385 302803   Fax: 01536 723021
 (The contents of this post will _NOT_ appear in the UK Newsletter.)