[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Standard Bearing Number, 5kq

To: gerard@dockside.co.za
Subject: Re: Standard Bearing Number, 5kq
From: Orin Eman <orin@wolfenet.com>
Date: Thu, 25 Feb 1999 01:23:01 -0800 (PST)
Cc: quattro@coimbra.ans.net
In-Reply-To: <mailstart.2/25/99.1306.048.> from "gerard@dockside.co.za" at Feb 25, 99 00:21:49 am
Sender: owner-quattro@coimbra.ans.net



> > It just so happens that I have a brand new bearing kit
> > here, 86.5 5k onward, 82mm OD.  Bearing is FAG, number is
> > 565636.

> I hope the bearing kit comes with the circlips.

If you buy the kit with the Audi part number, you get circlip, axle
nut/bolt as appropriate and ball joint bolt (the old bolt gets
trashed when you remove it).  That FAG number is the bearing only.
There is only one circlip after '86 or so.

Orin.

References:
- re: Standard Bearing Number, 5kq
  - From: gerard@dockside.co.za

Prev by Date: Re: Help me with my hit and run..can anyone trace phone numbers?
Next by Date: RE: Wheel Bearing Pullers (longish)
Prev by thread: re: Standard Bearing Number, 5kq
Next by thread: Re: Standard Bearing Number, 5kq
Index(es):
- Date
- Thread