Re: Hydraulic pump rebuild - Day 9

["Fred Munro" <munrof@isys.ca>]

-----Original Message-----
From: Frank J. Bauer <frankbauer@thevine.net>
To: Fred Munro <munrof@isys.ca>; quattro@coimbra.ans.net
<quattro@coimbra.ans.net>
Date: Sunday, February 28, 1999 4:53 AM
Subject: Re: Hydraulic pump rebuild - Day 9


>At 08:47 PM 2/27/99 -0500, Fred Munro wrote:
>>    I use a 12mm allen wrench about 7" long. Put the short leg through a
>>hole in the cam gear, the end of the long leg against the alternator
>>mounting boss, and the cam bolt is easily loosened or tightened.
>>
>>Fred Munro
>>'91 200q  269k km
>
>that's easy for you to say, with your fancy 20 valve and all that...
>
>frank
>

    Mine's a 10 valve, Frank - the 20 valve was not imported into Canada in
1991.

Fred