Re: ur-q tie rods

[Martin Pajak <quattro@rogerswave.ca>]

Todd,

>  But, as I stated, it is a lot of trouble to make a ur-q end work unless you are
> using ur-q struts.

Way I did it on the Coupe was to cut the worn out Ur-q end and weld in a threaded
section so that the 4kq tie rod end can be used.  This way you keep the bent section
to clear the WG and don't have to worry about costs next time the tie rod end wears
out.
On the Ur-q I'll repeat this but weld in a larger dia. threaded section to go with
the 5k/t tie rod end which will fit the Ur-q strut.

HTH
--
Martin Pajak

http://www.geocities.com/MotorCity/5939

1982 Audi Coupe Turbo (475,000 km)
1982 Audi Coupe Quattro (155,000 km) Rally car
1983 Audi Ur-quattro (220,000 km)
1986 Audi 4000 S Quattro (382,000 km) with 5 bolt pattern

C.E.O. of examlastminuteallnighterrollthedice inc.