[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 90 front shocks - step by step, long

To: Andrei Talalaevskii <andrei@insti.physics.sunysb.edu>, Andrei Kogan <abk@phy.duke.edu>
Subject: Re: 90 front shocks - step by step, long
From: "Frank J. Bauer" <frankbauer@thevine.net>
Date: Sun, 14 Mar 1999 12:34:59 -0800
Cc: quattro@coimbra.ans.net
In-Reply-To: <Pine.SGI.3.91.990313221347.26836A-100000@insti.physics.sunysb.edu>
References: <3.0.5.32.19990310105536.015479c0@phy.duke.edu>
Sender: owner-quattro@coimbra.ans.net

andrei I & II sez:
>> 1. A cheap ($5) offset box wrench to use on the top nut.
>> ...
>> 2. a 19mm socket
>An alternative is an o-ratchet ($50 from sears with complete socket set 
>up to 17 mm) plus a 19 mm socket to it ($2 directly from the company). 
>The off-set on the wrench is not enough for many cars. O-ratchet will 
>work for any VW/Audi...

only if they make a 22mm 0-socket...

frank

References:
- 90 front shocks - step by step, long
  - From: Andrei Kogan <abk@phy.duke.edu>
- Re: 90 front shocks - step by step, long
  - From: Andrei Talalaevskii <andrei@insti.physics.sunysb.edu>

Prev by Date: Phoenix Service
Next by Date: Re: Oil Smell 91 200TQ Again!
Prev by thread: Re: 90 front shocks - step by step, long
Next by thread: Re: 90 front shocks - step by step, long
Index(es):
- Date
- Thread