Re: Timing belts and idler rollers

[Wolff <quattro200@earthlink.net>]

That's nothing. I got all set up with the 2048, a 4 foot breaker bar and
a jackstand under the fulcrum to remove the balancer bolt from my 4kq.
Put the socket in and was going to _lean_ on it, but one hand lightly
pushed the breaker bar down. Someone definately had not tightened it
properly last time.

> had pointed out that this was required.  Only disturbing thing - the
> crank pulley bolt came out at 250 lb ft.
>